GTXpro

GTXpro

Overview

GTXpro - Less is more. Less is pro.

With the GTXpro you get the benefits of an operator friendly high-end direct-to-garment printer with the best technology made by Brother.

Less ink consumption
New white print head technology with internal ink circulation developed by Brother. This results in using less white ink for cleaning.

Less time needed
The new design of the white print head allows the use of more nozzles compared to previous models. This allows up to 10% faster printing with special “High Speed print mode” print settings.

Less maintenance
We reduced the automatic cleaning processes for increased productivity drastically!

Less environmental pollution
OekoTex Passport and GOTS 5.0 certified Innobella Textile Inks.

Less operator problems
Installation and training by an DTG technician authorized by Brother. The new sensor technology detects, if the platen is too low in order to reduce ink mist and ensure print quality. Print Reservation Function for higher productivity.

Less restrictions
Easy printing on a wide variety of textiles such as trousers, shoes, caps and much more. Printing on various materials is possible, from cotton to silk or polyester – all with the same ink. Compact industrial design and size suitable for all kind of production environment. Easy to move and add to any production – for a flexible process modulation of your production.

Network and USB connection
for full industrial production integration

For further information visit:
www.brothergtxpro.com

 

 

 

Specifications

Printing Method Direct Inkjet Garment Printer
Machine Size 1400mm x 1300mm x 550mm
Machine Weight Approx. 120kg including Platen
Max. Printing Area 16“ x 21“ (40,64cm x 53,54cm)
Plate Delivered 14“ x 16“ (35,54cm x40,65cm)
Ink Type Water-based pigment ink (200 and 500ml pouches available)
Ink Color CMYKW
Ink-head type Brother manufactured on demand piezo head
Number of ink-heads 2
Printhead resolution 1200 dpi x 1200 dpi
Print Mode Single or double for CMYK. Underbase and highlight for white
Enviroment Operating conditions: 50°F(10°C)to 95°F(35°C) Humidity: 20-85% RH, Printing conditions: 64°F(18°C)to 86°F(30°C) Humidity: 35-85% RH
Data output Printer driver (USB, File output, LAN)
Power supply AC 100V-240V, 50/60Hz
Power consumption 0.8A (average) (Reference: 0.4A (during circulation))
Ink cure Heat press machine can be used at 356°F (180°C) and 35 seconds duration. Conveyor oven is recommended to support high productivity of the printer at 320°F (160°C) and 3.5 minutes duration. Time and temp. may vary depending on which manufacturer‘s dryer is used.
Pre-treatment Before printing, apply pre-treatment using either a manual or automatic device and then dry garment using a heat-press, being sure to follow all manufacturer‘s instructions. Pre-treatment is necessary for white ink.
Software
OS Windows 8.1 (64 bit), Windows 10 (64 bit), macOS 10.14 Mojave, macOS 10.15 Catalina
Interface USB2.0, LAN (10 BASE-T, 100 BASE-TX, 1000 BASE-T), USB Flash Memory (Under 32GB, FAT32 format)
Driver operating conditions 2GHz CPU, 4GB RAM
Display resolution XGA (1024×768)
Recommended PC applications CorelDRAW® X6/X7, Adobe® Photoshop CS6/CC, Adobe® Illustrator CS6/CC, CorelDRAW® 2018/2019 (Windows)

Support Documents